Thanks for visiting BeadShop. Please remember to bookmark this page 6mm Loose. If you found what your looking for, then don"t forget to click an appreciation button above for this post.
 6mm Turquoise Heishi Yellow Gemstone Loose Bead бусинка XXI US $5.99 
|
 6mm Turquoise Heishi Orange Gemstone Loose Bead бусинка XXI US $5.99
|
 6mm Turquoise Heishi Pink Gemstone Loose Bead бусинка XXI US $5.99
|
 Blue Mother Of Pearl 6mm Round Beads Loose Strand 16" US $5.99
|
 6mm Turquoise Heishi Yellow Gemstone Loose Beads US $8.89
|
 6mm Turquoise Heishi Orange Gemstone Loose Beads US $8.98
|
 6mm Turquoise Heishi Pink Gemstone Loose Beads US $9.00
|
 6mm Ambarino Bernsteinfarbig Ambrato Amber Loose Beads US $13.98
|
 6mm Ambarino Bernsteinfarbig Ambrato Rice Amber Loose Beads US $13.99
|
6mm Loose
Learn What Airsoft Parts Are Available Part 2
In this article, you will find out about the different airsoft parts available to upgrade your gun. This is part 1 of a 3 part series. As you will soon find out, there are a variety of parts you can buy to upgrade your Airsoft AEG. This article will talk about piston heads bushings, shims, pistons, and gears.
Piston. The basic job of the piston is to compress air in the cylinder. It's basically a flat-tooth gear. This is what happens in an AEG gearbox; the motor turns the gears which then engage the piston and moves it back until the spring is fully compressed. Once the spring is fully compressed, the piston disengages the gears and flys forward compressing air in the cylinder. This puts a ton of pressure on the airsoft piston. It's good to have a metal piston in your AEG if you primarily shoot semi-auto, but if you often shoot full-auto, you run the risk of your gears being stripped.
Piston Head. The purpose of a piston head is to seal air into the cylinder. You can purchase silent piston heads and also piston heads with ball bearings, which help to increase the FPS of your AEG.
Gears. There are three separate gears in an airsoft gearbox: the spur gear, the sector gear, and the bevel gear. Airsoft Gears are probably one of the more expensive upgrades for an gun. When you run a high torque or speed setup, you should use steel gears in your gearbox so that you gears will not break. If you have a high torque setup, you should use helical gears because high torque setups are what they are specifically designed for. Helical gears are also quieter than standard gears.
Bushings. The purpose of airsoft bushings is to keep the gears in place and allow them to rotate. Most AEGs come stock with 6mm plastic bushings, but it's a good idea to replace them with metal bushings. For higher torque or speed setups, a new gearbox shell that uses 7mm or 8mm bushings would be good.
Shims. In order for your gears to stay aligned and correctly meshed, your gearbox has shims. Your motor will get worn out if you shim your gearbox to tightly. If your shimming is to loose, the gears may break.
About the Author
If you're searching for an airsoft retailer which is committed to providing their shoppers with excellent client service, good pricing, and premium quality products. Stop by http://www.raptors-airsoft.com. There you'll be able to find airsoft gear which range from Airsoft M4 Magazine to Airsoft Silencer.
If you are looking for a different item here are a list of related products on BeadShop, please check out the following:
